-
-
In the use of PE pipe, especially PE water supply pipe, small diameter pipe can often use some PE pipe fittings, PE pipe fittings is the role of the pipe and fittings between the fusion of a whole, in order to effectively eliminate water leakage potential.
Through the electrofusion welding machine to control the resistance wire buried in the pipe fittings voltage, current and energizing time, to achieve the purpose of fusion. The key wide melting area ensures no bending stress, more reliable and safer interface, and supports barcode scanning welding.
Types of pipe fittings: electrofusion sleeve, electrofusion reducer, electrofusion 45° elbow, electrofusion 90° elbow, electrofusion equal diameter tee, electrofusion reducer tee, electrofusion equal diameter tee, electrofusion reducer tee and so on.
Adopting special heat fusion welding equipments, it can be fused with pipes of the same diameter under the specified temperature, time and pressure to achieve the purpose of fusion welding. The length of the socket section of the pipe fittings meets the requirements of the second welding of the heat fusion butt joint to meet the requirements of the electrofusion connection.
Types of pipe fittings: equal diameter tee, reducer tee, equal diameter tee, reducer tee, heat fusion 45 ° elbow, heat fusion 90 ° elbow, reducer straight, pipe plugs and so on.
Adopting special heating tools to heat the socket part, make it melt, and then pressurize the socket to connect into one piece, with precise insertion depth and angle marking line, saving time and labor for construction. Suitable for small diameter pipe connection, not for gas pipe connection.
Types of pipe fittings: inner/outer tooth joints, inner/outer tooth tees, inner/outer tooth elbows, 45° elbows, 90° elbows, straight, tees, pipe plugs and so on.
Screw connection: connection with the same specification of the inner or outer wire.
Flange connection: flange sleeve and pipe material is the same, flange is steel, the surface for anti-corrosion treatment. Can be used for other piping or piping accessories connection, high strength connection, easy disassembly, good tightness.
Steel-plastic conversion connection: the plastic end is connected with the pipe of the same material by hot fusion or electrofusion, and the steel pipe end is anticorrosion treated and connected with the steel pipe of the same material.
