PE water supply pipe fittings manufacturers give you an introduction to PE water supply pipe. PE water supply pipe material is mainly PE80 and PE100 two grades, different grades of PE80 and PE100 correspond to different pressure strength. The quality of products meets the requirements of GB/T13663.2 and ISO4427-2 standards.
| Nominal Outside Diameter Nominal wall thickness mm | ||||||||
| dn | SDR41 | SDR33 | SDR26 | SDR21 | SDR17 | SDR13.6 | SDR11 | SDR9 |
Tube Series | ||||||||
| S20 | S16 | S12.5 | S10 | S8 | 56.3 | S5 | S4 | |
| PE80 Nominal pressure MPa | ||||||||
| 0.32 | 0.4 | 0.5 | 0.6 0.8 PE100 Nominal Pressure MPa | 1 | 1.25 | 1.6 | ||
| 0.4 | 0.5 | 0.6 | 0.8 | 1 | 1.25 | 1.6 | 2 | |
| 16 | 2.3 | |||||||
| 20 | 2.3 | 2.3 | ||||||
| 25 | 2.3 | 2.3 | 3.0 | |||||
| 32 | 一 | 2.3 | 2.4 | 3.0 | 3.6 | |||
| 40 | 2.3 | 2.4 | 3.0 | 3.7 | 4.5 | |||
| 50 | 2.3 | 2.4 | 3.0 | 3.7 | 4.6 | 5.6 | ||
| 63 | 2.5 | 3.0 | 3.8 | 4.7 | 5.8 | 7.1 | ||
| 75 | 2.9 | 3.6 | 4.5 | 5.6 | 6.8 | 8.4 | ||
| 90 | 3.5 | 4.3 | 5.4 | 6.7 | 8.2 | 10.1 | ||
| 110 | 4.2 | 5.3 | 6.6 | 8.1 | 10.0 | 12.3 | ||
| 125 | 4.8 | 6.0 | 7.4 | 9.2 | 11.4 | 14.0 | ||
| 140 | 5.4 | 6.7 | 8.3 | 10.3 | 12.7 | 15.7 | ||
The maximum DN of the pipe reaches 1600mm, and we also offer special sizes of customized services. Please click message board below to mail us.
Jiang te's pipes are categorized according to the nominal wall thickness (mm), pressure strength (SDR), and nominal outside diameter (dn) of the product to provide the sizes required by the customer.
In addition to the commonly used sizes, Jiang te can also customize special sizes and provide customized logos. For more details of product requirements, you are welcome to communicate with us.
JIANGTE PE water supply pipe has a series of advantages such as high toughness, corrosion resistance, anti-cracking, stable interface, lightweight and easy to construct, etc. It is widely used in urban water supply. In addition to the traditional excavation method for construction, it can also be constructed by non-excavation technology. Specific features are as follows:
Small Density: With a density of about 0.94~0.965g/cm, these lightweight pipes are easier to carry and install than traditional steel or cast iron reducing labor and installation costs.
Elongation at Break: With over 500% adaptability, these pipes handle uneven settlements and poor construction conditions offering excellent seismic performance.
Flexibility: Soft and flexible, small diameter polyethylene pipes can be coiled for longer lengths, reducing the need for fittings and material costs. Ideal for trenchless construction, they allow flexible direction changes.
Light weight tube, easy to handle.
Excellent impact resistance, good low-temperature resistance, low-temperature embrittlement temperature up to -70 degrees Celsius.
Tubes are designed to last 50 years without frequent replacement.
Good hygiene, solving the problem of secondary pollution of drinking water, in line with GB/T17219-1998 health and safety evaluation regulations.
Pipes are connected by heat fusion for reliable performance and low leakage rate in the pipe network.
Resistant to twisting and earthquakes.
Good chemical stability, resistant to various acids, alkalis, salt corrosion.
Convenient construction, simple welding process, low overall project cost.
